SBR05M60BLP document number: ds31771 rev. 2 - 2 1 of 4 www.diodes.com june 2010 ? diodes incorporated SBR05M60BLP sbr is a registered trademark of diodes incorporated. 0.5a sbr ? bridge super barrier rectifier features ? ultra low leakage current ? excellent high temperature stability ? patented super barrier rectifier technology ? soft, fast switching capability ? 150oc operating junction temperature ? lead free finish, rohs compliant (note 1) ? ?green? device (note 3) mechanical data ? case: dfn3030-4 ? case material: molded plastic ?green? molding compound, ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? nipdau over copper lead frame, solderable per mil-std-202, method 208 ? polarity: see diagram ? marking information: see page 3 ? ordering information: see page 3 ? weight: 0.02 grams (approximate) maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 60 v average rectified output current i o 500 ma non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (per diode) i fsm 8 a thermal characteristics characteristic symbol typ max unit thermal resistance junction to ambient air (note 2) r ja 215 - c/w operating and storage temperature range t j , t stg -55 to +150 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition forward voltage (per diode) v f - - 0.43 0.40 0.42 0.49 0.46 v i f = 0.25a, t j = 25oc i f = 0.5a, t j = 25oc i f = 0.5a, t j = 125oc reverse current (note 4) (per diode) i r - 17 2.8 100 20 a ma v r = 60v, t j = 25oc v r = 60v, t j = 125oc notes: 1. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied, see eu directive 2002/95/ec annex notes. 2. polymide pcb, 2 oz. copper; minimum recommended p ad layout per http://www.d iodes.com/datasheets/ap02001.pdf. 3. diodes inc.?s ?green? policy can be found on our webs ite at http://www.diodes.com /products/lead_free/index.php 4. short duration pulse test used to minimize self-heating effect. top view device schematic top view pin confi g uration 2 1 3 4 1 2 4 3 n/c
SBR05M60BLP document number: ds31771 rev. 2 - 2 2 of 4 www.diodes.com june 2010 ? diodes incorporated SBR05M60BLP sbr is a registered trademark of diodes incorporated. 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0.5 1 1.5 i , average forward current (a) fig. 1 forward power dissipation f(av) p , p o we r dissi p a t i o n (w) d 0.001 0.01 0.1 1 0 100 200 300 400 500 600 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f fig. 2 typical forward characteristics v , instantaneous forward voltage (mv) f t = 25c a t = 125c a t = 85c a t = 150c a 0102030405060 fig. 3 typical reverse characteristics v , instantaneous reverse voltage (v) r 1 10 100 10,000 i, i n s t a n t a n e o u s r eve r se c u r r e n t (a) r 1,000 t = 25c a t = 85c a t = 125c a t = 150c a 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 25 50 75 100 125 150 175 t , ambient temperature (c) a fig. 4 forward current derating curve i, ave r a g e f o r wa r d c u r r e n t (a) f(av) 0 25 50 75 100 125 175 0 6 12 18 24 30 36 42 48 54 60 v , dc reverse voltage (v) fig. 5 operating temperature derating r t , ambie n t t em p e r a t u r e ( c ) a 66 150
SBR05M60BLP document number: ds31771 rev. 2 - 2 3 of 4 www.diodes.com june 2010 ? diodes incorporated SBR05M60BLP sbr is a registered trademark of diodes incorporated. ordering information (note 5) part number case packaging SBR05M60BLP-7 dfn3030-4 3000/tape & reel notes: 5. for packaging details, go to our w ebsite at http://www.diodes .com/datasheets/ap02007.pdf. marking information date code key year 2009 2010 2011 2012 2013 2014 2015 code w x y z a b c month jan feb mar apr may jun jul aug sep oct nov dec code 1 2 3 4 5 6 7 8 9 o n d package outline dimensions dfn3030-4 dim min max typ a 0.57 0.63 0.60 a1 0 0.05 0.02 a3 - - 0.15 b 0.35 0.45 0.40 d 2.90 3.10 3.00 d1 1.075 1.275 1.175 d2 0.925 1.125 1.025 d3 1.075 1.275 1.175 e 2.90 3.10 3.00 e - - 1.30 e1 0.615 0.815 0.715 e2 1.78 1.98 1.88 e3 0.715 0.915 0.815 h 0.05 0.15 0.10 i 0.20 0.30 0.25 j 0.185 0.285 0.235 k 0.065 0.165 0.115 l 0.30 0.60 0.45 m 0.05 0.15 0.10 z - - 0.65 all dimensions in mm 5 6 = product type marking code ym = date code marking y = year (ex: w = 2009) m = month (ex: 9 = september) dfn3030-4 n/c e e3 d3 e2 d2 l d e1 d1 side view bottom view a1 a3 e b z h m i k a j
SBR05M60BLP document number: ds31771 rev. 2 - 2 4 of 4 www.diodes.com june 2010 ? diodes incorporated SBR05M60BLP sbr is a registered trademark of diodes incorporated. suggested pad layout important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com dimensions value (in mm) c 1.300 g1 0.100 g2 0.150 g3 0.830 g4 0.115 g5 0.135 g6 0.170 g7 0.500 g8 0.500 r 0.150 x 0.500 x1 1.375 x2 1.225 x3 1.175 y 1.980 y1 1.015 y2 0.715 y3 0.650 y x2 x c y3 y2 y1 x1 g5 x3 g1 g2 g3 g4 r g6 g7 g8
|
